ANTI-STAINNING SOAPING AGENT RG-HFZL1420
Product overview:
It is applied to reactive dyes washing. It has excellent soaping performance and anti-stain property in high concentrate electrolyte and high hardness water. It can widely use in different dyes.Saving water and energy, shorting process and enhancing productivity.
Main components: High molecular polymer
Appearance: Light yellowish to brown viscous liquid
Physical and chemical index:
Density: 1.02-1.08g/cm3 (20ºC)
PH Value: 6.0-8.0 (10% aqueous solution)
Ionicity: Anionic / non-ionic
Solid content: 14%
Solubility: Can be mixed with water in any proportion
Performance characteristic and application:
Anti-stainning soaping agent RG-HFZL1420 is active both in acid and alkaline conditions, under conditions of high concentrate salt (about 20g/L) and hardness up to 3000mg/kg(3000ppm) can give full play to the soaping efficiency. It has strong affinity of hydrolyzed dyes, can prevent back-stainning, also can short the soaping washing process significantly in the washing technology, and has those properties of saving water and energy, reducing sewage discharges. In addition to, this agent can also give the fabrics higher fastness consistency and reproducibility.
Anti-stainning agent RG-HFZL1420 has the following characters:
If general soaping agent, often use surface-active agent and protective colloid etc., under the condition of water hardness is higher, the soaping effect declined obviously. But the anti-stainning soaping agent RG-HFZL1420 can be full play excellent soaping effect even under the condition of harness up to 3000mg/kg, even use poor quality water ( for example harness up to 200mg/kg above), can still get excellent soaping effect.
Application method:
Reactive dye widely used in cellulosic fiber fabric dyeing and printing. Reactive dye need soaping wash after dyeing or printing, so that can enhance its various fastness, common soaping agent has surface active agent type (such as industry soaping powder etc.), chelating type (such as
polyacrylate) and blended type and so on. These soaping agent normally request the salt concentration of soaping bath under 2g/L when in reactive dye soaping process, and the water is soft water (hardness is under 100mg/kg(100ppm). If the salt concentration is higher, will occur "secondary dyeing" when heating temperature for soaping wash, thus will make the floating color like direct dyes to dye the fabric again. While hard water will make the water-soluble high floating color (hydrolyzed dyes) become to anti-soluble sediment, both of them will reduce the soaping agent anti-stainning ability, then greatly influence soaping effective.
When anti-stainning soaping agent RG-HFZ applied in reactive dye soaping, it still has excellent soaping property and resistant to re-stainning property even under high concentration electrolyte and high hardness water conditions.
Furthermore, it has those advantages such as saving water and energy, enhance the productivity. For example in the after washing of pure cotton yarn, it can save 4 times of washing than common process, can short the process time about 30min; in after washing of pure cotton fabric, it can save 2 times washing than common process, and each performance index can reach to or a little higher than regular performance index.
Anti-stainning soaping agent RG-HFZ application process example:
Bath ratio: 16:1
Dyeing recipe: (%)
Reactive red EC 0.15
Reactive dark blue EC: 0.45
Reactive blue KN-R: 3.50
Sodium sulfate (g/L): 60
RCF caustic soda liquid (g/L): 3.0
Trisodium phosphate (g/L): 8.0
Traditional after wash technological process
Washing (40ºC×5min) →Washing (40ºC×5min)→Acid neutralizing (15min) →Washing (40ºC×5min)→Washing (40ºC×5min)→Soaping (1g/L of Soaping agent, 98ºC×10min)→Washing (70~80ºC×5min)
→Warm temperature washing (2~3min)→Warm washing (2~3min)
Our company recommended technological process:
Acid neutralizing (3g/L of Acetic acid, 50ºC×15min)→Washing (40ºC×5min)→Washing (1.5g/Lof Anti-stainning soaping agent RG-HFZ, 98ºC×10min)→Washing (80ºC×5min)→Washing (40ºC×2~3min)
Sheet 1-
Washing fastness test (Level) after dyeing of pure cotton yarn reactive dyes
Compared the above two process, when use anti-stainning agent
RG-HFZ wash, can save common 4 times washing, reduce the sewage
discharge, short process time for about 30 min, and enhance
productivity greatly.
Traditional after washing technological process
Washing (40ºC×5min) →Washing (40ºC×5min)→Acid neutralizing (10min)→Washing (95ºC×10min)→Washing (95ºC×10min)→Washing (60ºC×10min)→Washing (10min)→Fixing color →Softening
Our company recommended soaping technological process:
Washing (40ºC×5min)→Washing (1g/L of Anti-stainning soaping agent RG-HFZ, 95ºC×10min)→Washing (1g/L of Anti-stainning soaping agent RG-HFZ, 95ºC×10min) →Washing (60ºC×10min)→Washing (10min)→Fixing color →Softening
Sheet 2-
Washing fastness test (level) of pure cotton knitted fabric after dyeing
Pure cotton knitted fabric use Anti-stainning agent RG-HFZ to wash
can save two times washing of regular process, reduce sewage
discharge, short process time about 30 min, each performance index
can reach to or a little better than clients common used washing
process, and can save water and energy, as well as high efficient.
Specific process should be appropriate adjusted according to test.
Package and Storage:
50kg or 125kg plastic drum or according to clients demands.
Prevent from insolation and frozen, stored in room temperature. Sealed storage under temperature of 2-25 degree, the guarantee period can be 12 months.
Product should be used up as soon as possible once the package opened; packing should be tightly closed after use.
Product overview:
It is applied to reactive dyes washing. It has excellent soaping performance and anti-stain property in high concentrate electrolyte and high hardness water. It can widely use in different dyes.Saving water and energy, shorting process and enhancing productivity.
Main components: High molecular polymer
Appearance: Light yellowish to brown viscous liquid
Physical and chemical index:
Density: 1.02-1.08g/cm3 (20ºC)
PH Value: 6.0-8.0 (10% aqueous solution)
Ionicity: Anionic / non-ionic
Solid content: 14%
Solubility: Can be mixed with water in any proportion
Performance characteristic and application:
Anti-stainning soaping agent RG-HFZL1420 is active both in acid and alkaline conditions, under conditions of high concentrate salt (about 20g/L) and hardness up to 3000mg/kg(3000ppm) can give full play to the soaping efficiency. It has strong affinity of hydrolyzed dyes, can prevent back-stainning, also can short the soaping washing process significantly in the washing technology, and has those properties of saving water and energy, reducing sewage discharges. In addition to, this agent can also give the fabrics higher fastness consistency and reproducibility.
Anti-stainning agent RG-HFZL1420 has the following characters:
- Anti-stainning agent RG-HFZL1420 has excellent soaping property.
If general soaping agent, often use surface-active agent and protective colloid etc., under the condition of water hardness is higher, the soaping effect declined obviously. But the anti-stainning soaping agent RG-HFZL1420 can be full play excellent soaping effect even under the condition of harness up to 3000mg/kg, even use poor quality water ( for example harness up to 200mg/kg above), can still get excellent soaping effect.
- Excellent resistant to re-stain property.
- Wide application range.
Application method:
Reactive dye widely used in cellulosic fiber fabric dyeing and printing. Reactive dye need soaping wash after dyeing or printing, so that can enhance its various fastness, common soaping agent has surface active agent type (such as industry soaping powder etc.), chelating type (such as
polyacrylate) and blended type and so on. These soaping agent normally request the salt concentration of soaping bath under 2g/L when in reactive dye soaping process, and the water is soft water (hardness is under 100mg/kg(100ppm). If the salt concentration is higher, will occur "secondary dyeing" when heating temperature for soaping wash, thus will make the floating color like direct dyes to dye the fabric again. While hard water will make the water-soluble high floating color (hydrolyzed dyes) become to anti-soluble sediment, both of them will reduce the soaping agent anti-stainning ability, then greatly influence soaping effective.
When anti-stainning soaping agent RG-HFZ applied in reactive dye soaping, it still has excellent soaping property and resistant to re-stainning property even under high concentration electrolyte and high hardness water conditions.
Furthermore, it has those advantages such as saving water and energy, enhance the productivity. For example in the after washing of pure cotton yarn, it can save 4 times of washing than common process, can short the process time about 30min; in after washing of pure cotton fabric, it can save 2 times washing than common process, and each performance index can reach to or a little higher than regular performance index.
Anti-stainning soaping agent RG-HFZ application process example:
- After washing process of yarn:
Bath ratio: 16:1
Dyeing recipe: (%)
Reactive red EC 0.15
Reactive dark blue EC: 0.45
Reactive blue KN-R: 3.50
Sodium sulfate (g/L): 60
RCF caustic soda liquid (g/L): 3.0
Trisodium phosphate (g/L): 8.0
Traditional after wash technological process
Washing (40ºC×5min) →Washing (40ºC×5min)→Acid neutralizing (15min) →Washing (40ºC×5min)→Washing (40ºC×5min)→Soaping (1g/L of Soaping agent, 98ºC×10min)→Washing (70~80ºC×5min)
→Warm temperature washing (2~3min)→Warm washing (2~3min)
Our company recommended technological process:
Acid neutralizing (3g/L of Acetic acid, 50ºC×15min)→Washing (40ºC×5min)→Washing (1.5g/Lof Anti-stainning soaping agent RG-HFZ, 98ºC×10min)→Washing (80ºC×5min)→Washing (40ºC×2~3min)
Sheet 1-
Washing fastness test (Level) after dyeing of pure cotton yarn reactive dyes
Washing fastness (ISO105-C03) | Rubbing fastness | |||||
Dyed yarn discoloring | Cotton color stainning | Nylon color stainning | Dry rubbing | Wet rubbing | ||
National standard | 3~4 | 3~4 | - | 3~4 | 3 | |
Anti-stainning soaping agent RG-HFZ | 4~5 | 4~5 | 4 | 4~5 | 3 | |
Compared the above two process, when use anti-stainning agent
RG-HFZ wash, can save common 4 times washing, reduce the sewage
discharge, short process time for about 30 min, and enhance
productivity greatly.
- After washing process of pure cotton knitted fabric
- Bath ratio: 9:1
- Dyeing recipe: (%)
- Reactive yellow RNF 4.160
- Reactive RED 3BS: 5.000
- Reactive blue BB: 0.078
- Sodium sulfate (g/L): 90.00
- Trisodium phosphate (g/L): 00
Traditional after washing technological process
Washing (40ºC×5min) →Washing (40ºC×5min)→Acid neutralizing (10min)→Washing (95ºC×10min)→Washing (95ºC×10min)→Washing (60ºC×10min)→Washing (10min)→Fixing color →Softening
Our company recommended soaping technological process:
Washing (40ºC×5min)→Washing (1g/L of Anti-stainning soaping agent RG-HFZ, 95ºC×10min)→Washing (1g/L of Anti-stainning soaping agent RG-HFZ, 95ºC×10min) →Washing (60ºC×10min)→Washing (10min)→Fixing color →Softening
Sheet 2-
Washing fastness test (level) of pure cotton knitted fabric after dyeing
Washing fastness (AATCC2A,49ºC) | Crabbing fastness (AATCC8) | |||
Dyed fabric discoloring | Cotton fabric stainning color | Dry crabbing | Wet crabbing | |
Before fixing | 4~5 | 4~5 | 4~5 | 3 |
After fixing | 4~5 | 4~5 | 4~5 | 3 |
Pure cotton knitted fabric use Anti-stainning agent RG-HFZ to wash
can save two times washing of regular process, reduce sewage
discharge, short process time about 30 min, each performance index
can reach to or a little better than clients common used washing
process, and can save water and energy, as well as high efficient.
Specific process should be appropriate adjusted according to test.
Package and Storage:
50kg or 125kg plastic drum or according to clients demands.
Prevent from insolation and frozen, stored in room temperature. Sealed storage under temperature of 2-25 degree, the guarantee period can be 12 months.
Product should be used up as soon as possible once the package opened; packing should be tightly closed after use.